Hitachi CHROMASTER 5160, Instruction Manual

Page: 298 / 1022

3.2 Utility Setting
Set the full scale of processor output.
Press [numerical] key (within [1] to [4]), and then the
[ENT] key.
* Default value: 3
5) Upon completion of processor setting, the first monitor
screen reappears.
(b) Setting the Enable or Disable Status of Error Signal Output
SET UP
1) Press key.
UTLTY
2) The utility setup screen appears.
Utility Setup Screen
1 USE PROG=3, POLARITY=4, OTHERS=5)
UTILITY (OFFSET=1, TIME CONSTANT=2,
Select OTHERS.
Press [numerical] key [5], and then the [ENT] key.
3) The OTHERS setup screen appears.
1 LEAK SENSOR=3, LAMP=4, GAIN=5)
OTHERS (PROCESSOR=1, ERROR OUT=2
Select ERROR OUT.
Press [numerical] key [2], and then the [ENT] key.
4) The ERROR OUT setup screen appears.
1
ERROR OUT SIGNAL (DISABLE=0
，
ENABLE=1)
Set the ENABLE or DISABLE status of ERROR OUT.
Press [numerical] key ([1] or [0]), and then the [ENT]
key.
* Default value: 1
5) Upon completion of ERROR OUT setting, the first
monitor screen reappears.
3 - 16