Hitachi CHROMASTER 5160, Instruction Manual

Page: 463 / 1022

The 1st monitor screen (FL indication)
TIME Ex Em FL PROG LAMP [I]
0.0 250 350 0.0 1 Xe
The 2nd monitor screen (energy indication)
Ex Em MONITOR (Ex) (Em) CELL [I]
250 350 ****** ****** ---
a) The indicated values are the default values or currently
set values.
b) The indicated program number is the currently selected
one. However, when the time program is not used, “-
”is indicated.
c) In lamp indication, Xe stands for the lit status of the
xenon lamp and OFF stands for the extinguished
status.
d) Fluorescence intensity (FL) is indicated within a range
from -1000.0 to 1000.0. If the intensity is outside this
range, “******” is indicated.
e) The thermo cell indication is as follows.
ON : The thermo cell (option) is running.
OFF : The thermo cell is suspended.
“----” : The thermo cell is disconnected.
f)
Status indicators should be read as follows.
[I] : Initial
status.
[R] : Time program running status
[B] : Busy status
[L] : Key-locked status
Elapsed
time
Excitation
wavelength Emission
wavelength
Fluorescence
intensity
Program
number Lamp
indicator
Status
indicator
U
key,
V
key or ESC key U key or V key
Excitation
wavelength
Emission
wavelength
Excitation WL
energy
Emission WL
energy
Thermo cell indication
Status
indicator
3 - 3