Hitachi CHROMASTER 5160, Instruction Manual

Page: 846 / 1022

(1) Press the power switch to turn on the power supply.
(2) At the start, LCD indicates startup screen. After a few
seconds, initial screen will be indicated, and an initialize-
processing test is executed simultaneously.
(a) Startup screen
(C) Hitachi High-Technologies Corp. 2010
Auto Sampler 8928120-00
Initializing, self-testing, and indicating a copyright are
performed. The program number and version will be
confirmed on the startup screen.
(b) 1
st
monitor screen
This screen mainly indicates information about the
autosampler main frame.
1 1 1 10.0 1/1 0.0 [C]
STEP RACK VIAL VOL(µL) INJ TIME [ I ]
Indication Description
STEP A step in the running program
RACK No. of the sample rack under analysis
VIAL No. of the sample vial under analysis
VOL (
μ
l) Sample injection volume per injection
INJ Number of actual injections into each sample vial per
set number of injections
TIME Analysis time
Description of status indication at upper right of
monitor screen:
[I] ......... Idle status (initial status)
[B] ........ Busy status
[R]........ Program is running
[L] ........ Keyboard locked
[W] ....... Waiting for IDLE key input
[P] ........ Under a pause (temporary stop)
Description of status indication at lower right of monitor
screen:
[C]........ Cut injection method
[A] ........ All volume injection method
[F] ........ Full loop injection method
3 - 2