Hitachi CHROMASTER 5160, Instruction Manual

Page: 430 / 1022

SAFETY - 7
SAFETY SUMMARY
CAUTION Precautions in the Manual
CAUTION
Touching Hot Part Could Result in Burns
The light source lamp and its cover become hot during operation and remain hot for a
while even after power-off.
They can severely burn you if touched.
Before replacement of the lamp, turn power off and wait for about 30 minutes until it cools
down sufficiently.
(Section 5.2)
Direct Gazing at Illuminating Xenon Lamp Could Cause Eye Damage
The xenon lamp radiates intense ultraviolet light when it is on.
If you look at the illuminating xenon lamp during coarse adjustment of its position, your
eyes could be damaged. Do not look at the xenon lamp directly when it is lit. Be sure to
wear tinted safety glasses to prevent possible eye damage.
(Section 5.2)
Heavy Instrument
This instrument weight as much as 23 kg.
When carrying this instrument, exercise care not to incur injury by dropping it accidentally.
Be sure to hold the right and left parts of the instrument securely when moving it.
(Section 2.1)
Prevention of Instrument Tipover
Personal injury could be incurred if the instrument tips over. When installing the
instrument, provide a proper means for preventing the instrument from tipping over
accidentally.
(APPENDIX 1)
Fatigue due to Long-Hour Operation
If you keep working with the display monitor and keyboard for long hours, your eyes and
body will be fatigued to jeopardize your health. When working with the display monitor
for a long time, take a break for 10 to 15 minutes per hour for health of your eyes and
body.
(Chapter 3)