Hitachi CHROMASTER 5160, Instruction Manual

Page: 92 / 1022

3 - 55
(5) Deletion of Step
How to delete one step in a program is shown next.
PROG (SET PROG No.)
No. of program containing step to be
deleted (m) ENT (MODIFY=0, NEW=1)
0 ENT (MAX) Upper limit pressure
level ENT (MIN)
Lower limit pressure
level ENT DEL ENT ESC
1
Program number can be from 1 to 9.
2 For editing, input 0. For generating a new program, input
1.
3
If pump pressure rises beyond the level set here, the pump
automatically stops.
Set pressure is from 0.1 to 60.0 MPa.
4
If pump pressure falls below the level set here, the pump
automatically stops.
Set pressure is from 0.0 to 60.0 MPa.
5 Press the key until the step you want to delete appears
on the screen. If display advances beyond that step, press
the
key.
6 Press the DEL key when the cursor is on the TIME line
want to delete.
7 When the ESC key is pressed, Edit is finished, and
Monitor screen appears.
1
2 3
4 5 6 7