Hitachi CHROMASTER 5160, Instruction Manual

Page: 734 / 1022

(2) For 3-column Selector Valve
Where the column management system is used in the
Chromaster 5310 column oven which is set not to use a 3-
column selector valve, the data on the tags which are
connected to the relevant slot positions corresponding to
the respective valve positions of the 3-column selector
valve will be updated. The correspondence is as shown in
the table below.
Slot No. of the Tag on which Data is Updated
Valve
Position
For Analysis Column For Guard Column
1 A-1 G-1
2 A-2 G-2
3 A-3 G-3
(3) For 6-way 2-position Valve
For a 6-way 2-position valve, the slot of the tag on which
data is updated differs depending on whether the valve is
used as a column selector (in which case switching does
not occur by the time program) or as a switching valve (in
which case switching occurs by the time program).
Where the valve is used as a column selector
Slot No. of the Tag on which Data is Updated
Valve
Position
For Analysis Column For Guard Column
1 A-1 G-1
2 A-2 G-2
Where the valve is used as a switching valve
Slot No. of the Tag on which Data is Updated
Valve
Position
For Analysis Column For Guard Column
* A-1 G-1
* Regardless of the valve position, the tag data of the above slots
will be updated.
APPENDIX 1 - 27