Hitachi CHROMASTER 5160, Instruction Manual

Page: 46 / 1022

3 - 9
(4) When the setting condition is cancelled: press the ESC key
to return to the 1
st
monitor screen. And reset a condition.
(5) When the setting condition isn’t changed/entered: press
the ENT key or the
▽
key to move to the next screen
(Use
▽
and
△
keys to move back and forth).
(6) When a program isn't applied, a spectrum can be output
anytime. For this reason, when a spectrum output is
started during an acquisition of chromato data, it will be
output to an integrator.
The UI pad operation will be disabled when a Chromaster
GUI controller and CDS are connected
.
3.1.3 Operational State
The pump operational state is indicated below.
Press the key to operate.
Fig. 3-2 Pump State
INITIAL : Waiting for start in the programming mode.
MANUAL : Running state under the constant condition without
a program.
RUN : Gradient is in execution.
START
STOP
INITIAL
MANUAL MANUAL
MANUAL
RUN INITIAL
* While the pump is in the running state only