Hitachi CHROMASTER 5160, Instruction Manual

Page: 506 / 1022

3.5 Set Up Setting
Before analytical operation, communication channel (CH) and
liquid crystal display contrast (LCD CONTRAST) need to be set.
•
This setting is not required every time. When unnecessary,
skip this setting.
•
The default value or currently set value is indicated before
your input.
3.5.1 Communication channel (CH) setting
Set a communication channel via the e-Line in the following way.
(1) Turn on the power switch with the
UTLTY
SET UP
key held down.
(2) The following display will be presented.
<Setup initial screen>
SETUP: DETECT THERMO CONTRAST S. NO.
CH1 NO USE 4 02AB-111
Press the ENT key.
(3) The following display will be presented.
<Setup items selecting screen>
SETUP ITEMS (DETECTOR=1, THERMO CELL=2
1
CONTRAST=3, EXCHANGE STANDARD=4)
Select DETECTOR.
Press numeric key 1 and then the ENT key.
(4) The following display will be presented.
<Channel selecting screen>
DETECTOR (CH1=1, CH2=2)
1
3 - 46