Hitachi CHROMASTER 5160, Instruction Manual

Page: 96 / 1022

3 - 59
1 Program number can be from 1 to 9.
2
For correction, input 0. For generating a new program,
input 1.
3 If pump pressure rises beyond the level set here, the pump
automatically stops.
Values that can be inputted are 0.1 to 60.0 MPa.
4
If pump pressure falls below the level set here, the pump
automatically stops.
Values that can be inputted are 0.0 to 60.0 MPa.
5
Press the key until the step to be corrected appears on
the screen. If the display advances beyond that step,
press the
key.
6 When a correction is unnecessary, press the ENT key
only. The allowable input range is 0
to
600.0.
7
When a correction is unnecessary, press the ENT key.
Valid flow is from 0.00 to 5.000.
8
Enter the event code. When a correction is unnecessary,
press the ENT key.
9
When the ESC key is pressed, Edit is finished, and
Monitor screen appears.