Hitachi CHROMASTER 5160, Instruction Manual

Page: 319 / 1022

3.4.2
(c) Setting the Spectral Data to be Output (“3” key followed by
ENT key)
Press [numerical] key (within [1] to [3]), and then the [ENT]
key.
Next, input the spectrum No. for output.
In ABS data mode:
The output wait screen appears.
Press the [START] key.
During spectrum output, the following screen is presented.
In the REF data mode:
The output wait screen appears.
When the spectrum has been acquired with the W lamp, “W
REF” is indicated.
When the spectrum has been acquired with the Hg lamp,
“Hg” is indicated.
Press the [START] key.
During spectrum output, the following screen is presented.
1
RCD NO. SPEED WL-RANGE MODE: ABS
1 60 200 – 600 PRESS “START”
RCD NO. WL ABS SPEED
1 250 0.0000 60
RCD NO. SPEED WL-RANGE MODE: D2 REF
1 60 200 – 600 PRESS “START”
RCD NO. WL REF SPEED
1 250 300000 60
RECORD SPECTRUM NO. (1–3)
3 - 37