Hitachi CHROMASTER 5160, Instruction Manual

Page: 1021 / 1022

APPENDIX 3. TERMINOLOGY
Initialize.......................................... The instrument is initialized.
Initial screen .................................. Appears upon completion of initialization after turning on
the power supply.
Injection ......................................... Injection of sample.
Warming-up ................................... Warms up the instrument. Stable analysis requires
enough warm air.
Error message ............................... Statement which is displayed in the event of an anomaly
in the instrument.
Calibration ..................................... An operation for preparing the baseline for calculating the
concentration of a sample.
Pause (PAUSE)............................. A series of analysis of a sample is suspended and an
interrupt analysis is performed.
Start ............................................... A series of analysis is started.
Stop time ....................................... Time set which is required for analyzing a sample and
obtaining chromatogram. After a lapse of such time, a
series of analysis for the next sample is started.
Septum .......................................... Sheet used as the lid for a vial.
Loop injection method ................... A sample injection method in which a sample is, once
after stored in a loop temporarily, introduced into the
analysis channel.
Degassing...................................... Degassing of mobile phase as well as of detergent.
Table.............................................. Screen for setting up the analytical conditions for each
setting screen sample.
Pattern ........................................... A sequence in which the sample on the code rack is
analyzed.
Utility.............................................. A function for setting instrument operating conditions.
APPENDIX 3 - 1