EXFO Power Blazer 88000 Series, User Manual

Page: 290 / 803

Test Setup - Test Configurator, Timer, and System
278
88000 Series
Services - Global

Frame Size indicates the frame size of each service. Tap on the Frame
Size
button to modify the frame size of each service.

Framing indicates the framing of each service. Tap on the Framing
button to modify the
Frame Format
,
Network Layer
,
Transport Layer
,
VLAN , S-OAM MEG/MD Level , and MPLS when applicable (see Modify
Frame Structure
from the
MAC/IP/UDP
on page 204).

VLAN (ID/Priority) indicates the ID and Priority of each VLAN level for
each service. Tap on the
VLAN
button to modify the VLAN settings (see
VLAN from the MAC/IP/UDP on page 204).

Addressing
indicates the source and destination IP or MAC addresses
for each services. Tap on the Addressing button to modify the
addressing (see
MAC
and
IP
from the
MAC/IP/UDP
on page 204).
Batch button allows bulk configuration for services addressing. Select
the check box of each configuration parameter that needs to be copied
and set its parameters. From
Apply To , select all services the copy
applies to and tap on the
Copy From
to proceed.
SLA Button
The SLA parameters are displayed and configurable per service. Click on
the desired column button to access the configuration settings.
See
General Button
on page 277 for more information on check boxes,
Direction , and Service Name .
See
SLA Parameters
on page 285 for more information on
CIR
,
CIR+EIR
,
CBS , EBS , Max Jitter , Max Latency , and Frame Loss Rate .