EXFO Power Blazer 88000 Series, User Manual

Page: 269 / 803

Test Setup - Test Configurator, Timer, and System
Power Blazer
257
RFC 2544 - Subtests

Accuracy is the accuracy measurement in percentage of the line rate
(
%
),
Mbit/s
, or in
Gbit/s
. The accuracy is not based on the configured
Maximum Rate but on the Ethernet line rate. The accepted values are
as follows:

Acceptable Errors represents the number of acceptable errors for the
test:
0
(default) to
10
.

Validations represents the number of times the result should be
validated:
1
(default) to
50
times.
Interface
Speed
Max. Rate
% Mbit/s Gbit/s
10 Mbit/s 0.1 to 10.0
(default 1.0) 0.01 to 1.0
(default 0.10) Not Applicable
100 Mbit/s 0.1 to 10.0
(default 1.0)
0.1 to 10.0
(default 1.0) Not Applicable
1000 Mbit/s 0.1 to 10.0
(default 1.0)
1 to 100.0
(default 10) 0.001 to 0.100
(default 0.010)
10G LAN 0.1 to 10.0
(default 1.0) 10.0 to 1000.0
(default 100) 0.01 to 1.00
(default 0.10)
10G WAN 0.1 to 10.0
(default 1.0) 10.0 to 1000.0
(default 100.00) 0.01 to 1.00
(default 0.1)
40G 0.1 to 10.0
(default 1.0)
40.0 to 4000.0
(default 400.0) 0.04 to 4.00
(default 0.40)
100G 0.1 to 10.0
(default 1.0)
100.0 to 10000.0
(default 1000.0) 0.10 to 10.00
(default 1.0000)