manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 356

Test Results

344

88000 Series

Alarms/Errors Overview

Alarms/Errors Overview

Current and history alarms/errors are displayed using different 
background colors as defined in the following table. 

Seconds

 gives the total number of seconds in which one or more 

alarm/error occurred. 

Count

 gives the number of occurrences of a specific error. The 

count is displayed using integer value; exponential value (for 
example: 1.00000E10) is used when the count is bigger than the 
field display capacity. 

Rate

 calculates and displays the error rate. The rate is expressed 

using the exponential format with two decimal digits (example: 
1.23E-04). 

Note:

When an alarms/errors group displays a magnifying icon, tapping on it 
gives more information on alarm/error like Second, Count, and Rate.

Background 

color

Alarm/ 

Error

Description

Gray

Current

No test result available.

History

Green

Current

No alarm/error has occurred in the last second.

History

No alarm/error has occurred during the test.

Red

Current

An alarm/error occurred in the last second.

History

Amber

History

At least one alarm/error has occurred during the test.

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands