manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 557

Test Functions

Power Blazer

545

40/100G/400G Advanced - Lanes Mapping & Skew

40/100G/400G Advanced - Lanes Mapping & 

Skew 

Note:

Only available with parallel interfaces. Not available when the 

RS-FEC

 

check box is selected. 

From the

 Test

 menu, tap 

Functions

, 

40/100

G/400G A

dvanced

, and the 

Lanes Mapping & Skew 

tab. 

TX

PCS/Logical Lane

, for Ethernet test applications, indicates the PCS 

(Ethernet test applications) or Logical (Transport Test applications) 
lane markers. To change the PCS/Logical lane order, see 

Default/Random/Manual Mapping

 on page 547. 

Skew (Bits) 

indicates the TX relative delay in bit time for each 

PCS/Logical lane. To change the skew values, see 

Reset/Manual Skew

 

on page 548. 

400GAUI-16 Lane 

Indicates the 400GAUI-16 Lane numbers. Not available with CFP4 and 
QSFP. 

RX

Skew (bits)

 indicates the delay in bit time between the earliest 

PCS/Logical lane and the current lane for the one to zero transition of 
the alignment marker sync bits. The received skew accuracy is 
±100 bits. 

PCS/Logical Lane

 indicates received PCS/Logical Lane markers. 

Note:

If a PCS/Logical Lane marker is detected more than once, a red 
background is used to highlight all occurrences of this PCS/Logical Lane 
marker. 

Duplicate

 is also displayed on a red background.

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands