manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 249

Test Setup - Test Configurator, Timer, and System

Power Blazer

237

ODU Channels - Global

ODU Channels - Global 

From the 

Test

 menu, tap 

Setup

, 

Test Configurator

, tap on the test block 

(

ODU Channels

), and on the 

Global 

tab. 

Note:

The ODU channels global configuration applies to all channels. 

Pattern

The test pattern icon next to the 

Pattern

 label indicates the status of the 

received pattern signal. Refer to 

Status Bar

 on page 28 for more 

information.

No Pattern Analysis (Live)

 check box when cleared (default), 

monitors the received traffic pattern. For live traffic, the 

No Pattern 

Analysis (Live)

 check box should be selected as the traffic is a live 

pattern thus there is no analysis of pattern loss and bit error. 

Pattern

 sets the test pattern that will be generated: 

PRBS31

(default) 

or 

NULL Client

(0000). 

Invert

 check box, when selected (cleared by default), inverts the test 

pattern meaning that every 0 will be changed for 1 and every 1 for 0. 
For example, the pattern 1100 will be sent as 0011. 

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands