EXFO Power Blazer 88000 Series, User Manual

Page: 105 / 803

Selecting and Starting a Test
Power Blazer
93
Wireless Test Application
Wireless Test Application
To select, configure, and start a Wireless test:
1.
From the test menu, tap
Setup
.
2. From the Test Applications tab, under Wireless , tap the CPRI/OBSAI
BERT
test icon.
3.
From the Test Configurator tab configure the interface structure and
its parameters.
3a. Tap the
Modify Structure
button to set the basic structure of the
test such as the interface/rate, connector, etc. (refer to Modify
Structure Button
on page 108).
3b.
Tap the interface block to configure the interface parameters
(refer to page 182). For
Dual Port topology, there is an interface
block for each port. Ensure that the power level is present in the
status bar before proceeding to the next step (refer to
Status Bar
on page 28).
Modify Structure
Test Block
Interface Block
Physical
Interface Port
Clock Block