EXFO Power Blazer 88000 Series, User Manual

Page: 547 / 803

Test Results
Power Blazer
535
Traffic - OAM, S-OAM, and MPLS-TP OAM
Responder
Note: Available when the S- OAM Responder or MPLS-TP OAM Responder check
box is selected (refer to
S-OAM and MPLS-TP OAM Responder
on
page 268).
For
Carrier Ethernet OAM
test application:

In TX, reports counts of LBR, LTR, DMR, LMR, and SLR total frames
transmitted. LTR and SLR are only available with Ethernet OAM.

In RX, reports counts of valid LBM, LTM, DMM, LMM, and SLM unicast,
multicast, and total frames received. LTM and SLM are only available
with Ethernet OAM. A valid messages must have its:
S-OAM
: source MAC address matching the Peer MEP MAC address;
destination MAC address matching either the unit port Unicast MAC
address or a Multicast class 1 or class 2 address; VLANs matching the
unit port VLANs, and MEG/MD Level matching the local MEG/MD Level.
Refer to
Unicast/Multicast Addresses for Ethernet OAM
on page 757 for
more information.
MPLS-TP OAM
: destination MAC address matching either the unit MAC
address, FF:FF:FF:FF:FF:FF, or 01:00:5E:90:00:00; VLANs matching the
unit port VLANs; and MPL Labels matching the local MPLS Label Stack
configuration.
For
Smart Loopback
test application:

In TX, reports counts of LBR, LTR, DMR, LMR, and SLR total frames
transmitted.

In RX, reports counts of valid LBM, LTM, DMM, LMM, and SLM total
frames received. A valid messages must have its destination MAC
address matching either the unit port Unicast MAC address or a
Multicast class 1 or class 2 address. Refer to
Unicast/Multicast
Addresses for Ethernet OAM on page 757 for more information.