manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 714

Glossary

702

88000 Series

1588 PTP

Telecom Profile G.8275.1 

The Telecom Profile G.8275.1 is designed for time/phase synchronization in 
telecom network applications. The main attribute of this profile are:

Full timing support from the network, i.e. all network nodes are 
boundary clocks

Slave clocks synchronize with its respective upstream Boundary Clock

1588 messages are mapped on Ethernet Multicast

A very important distinction that has to be made compared with G.8265.1 is 
the mandatory use of Boundary Clocks with G.8275.1. With G.8265.1, 
network nodes such as Ethernet Switches or Routers were not required to 
be PTP aware. With G.8275.1, all network nodes needs to be PTP aware. 
This means that regular Ethernet Switches or Routers cannot be used. 
Switches/Routers are required to include the Boundary Clock functionality. 

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands