manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 445

Test Results

Power Blazer

433

Logger

Details

: Provides contextual information including the pass/fail verdict. 

The following table displays the nature of information reported by type of 
event:

Note:

The Logger table can display up to 5000 event entries. Once the Logger 
table reports 5000 event entries, a log full indicator appears and no further 
entries are possible. However, the events in the Pending state will be 
updated if the test is still running.

The Event Logger information will be cleared when:

the test is reset or started.

stopping the current test and.

the unit is restarted. 

Note:

An entry event remains in the Pending state as long as the event is not 
completed and it is highlighted on a yellow background color. 

Note:

The Threshold Crossing events are displayed in red text color. 

Type of Event

Nature of Information

Test Started

Start Date

Test Stopped

Pass/Fail Verdict 

Alarm Events

Count value

Error Events

Current Count and Total Count

SDT Events

Service Disruption Time

Threshold Crossing Event

Value at the end of the test

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands