EXFO Power Blazer 88000 Series, User Manual

Page: 531 / 803

Test Results
Power Blazer
519
Summary (Traffic Gen & Mon)
Summary (Traffic Gen & Mon)
From the
Test
menu, tap
Results
, and the
Summary
tab.

The P1 and P2 buttons, available with Dual Port topology, allow
respectively displaying the test summary for port #1 or port #2.

Test Status indicates the actual test status as follows. The global test
pass/fail verdict is displayed next to the
Test Status
when enabled (see
QoS Metrics on page 321).

“--”: The test is not running or results are not available.

In Progress : The test is running.

Completed
: The test is completed, stopped at the planned time, or
manually stopped when there is no set timer.

Start Time
indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset.

Test Recovery
, when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the
Test Recovery
field. Refer to
Power Failure Recovery on page 659.

Logger Full
, when displayed, indicates that the logger is full. Refer to
Logger on page 432.
Stream
The following statistics are available for each stream.

Current Throughput
: See
Streams - Throughput /
Customer Frame Throughput on page 466.

Frame Loss Rate
: See
Streams - Frame Loss / Out-of-Sequence
on
page 464.

Jitter
: See
Streams - Jitter
on page 464.

Latency : See Streams - Latency on page 465.