EXFO Power Blazer 88000 Series, User Manual

Page: 463 / 803

Test Results
Power Blazer
451
Quality Level (SyncE)

QL Mismatch Frame Count gives the total count of information and/or
event frames received not matching the expected Quality Level. Only
available when the
QL Mismatch Monitoring check box is selected.

TX

Information gives the count of information frames generated for
each Quality Level as well as the total of all Quality Level values.
For 1GE Electrical interface using
Slave as Master-Slave Clock ,
only the count for QL-DNU/DUS is reported.

Event gives the count of event frames generated for each Quality
Level as well as the total of all Quality Level values. Not available
with 1GE Electrical using
Slave as Master-Slave Clock .

RX

Information gives the count of information frames received for
each Quality Level as well as the total of all Quality Level values.

Event gives the count of event frames received for each Quality
Level as well as the total of all Quality Level values.
QL-SSU-B 8 Type VI slave clock (G.812)
QL-INV9 9 Quality Level Invalid 9
QL-EEC2/ST3
(default) 10 Ethernet Equipment Clock Option 2
Traceable to Stratum 3 (G.812 Type IV)
QL-EEC1/SEC 11 Ethernet Equipment Clock Option 1
Synchronous Equipment Clock (G.813 or G.8262, Option 1)
QL-SMC 12 Traceable to SONET Minimum Clock (G.813 or G.8262, Option 2)
QL-ST3E 13 Traceable to Stratum 3E (G.812 Type III)
QL-PROV 14 Provisionable by the Network Operator (PNO)
QL-DNU/DUS 15 Do Not Use
Do Not Use for Synchronization
Quality Level
value
SSM Description