EXFO Power Blazer 88000 Series, User Manual

Page: 517 / 803

Test Results
Power Blazer
505
Summary (RFC 6349)
Summary (RFC 6349)
From the
Test
menu, tap
Results
, and the
Summary
tab.

Status indicates the actual test status as follows:

Start Time
indicates the date and time the test was started. The date
and time is reset every time the test is restarted or reset. This is the only
information available on the remote module.

Test Recovery , when displayed, indicates that the test has
automatically recovered from a power failure. The number of
occurrences is also displayed next to the
Test Recovery field. Refer to
Power Failure Recovery
on page 659.
Test Status Description
“--” Test has not started.
In Progress The test is running.
Completed , <Verdict> Test has completed and the test pass/fail verdict is displayed
when enabled. A fail verdict is declared if any of the following
conditions occurs: Link Down, LOS, TCP Throughput verdict
failed, or any abort condition.
Aborted , < reason > Test has been aborted either manually (Stop) or automatically
due to an abort condition, and the reason is displayed as
follows:
Link Down Alarm , LOS Alarm , DTS Connection failed ,
No Communication with Remote , Remote is busy ,
Unexpected response from Remote,
Timeout during execution , Invalid Configuration ,
Unresolved addresses , Invalid MTU , User stopped,
TCP Timeout , TCP Connection failed , NAT detection failed ,
Missing DTS-NAT SW option