manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 254

Test Setup - Test Configurator, Timer, and System

242

88000 Series

ODU Channels - Global

Channel Assignation Status

 

The table provides a list of each channel ID, its ODU type, and the 
TX/RX assignment status. TX/RX indicates either 

Assigned

 when 

all tributary slot are selected for this channel or the number of 
assigned tributary slot over the total number of tributary slots for 
this channel. TX/RX status must be 

Assigned

 for all channels in 

order to complete the tributary slots/channels configuration. 
Channel are sorted by their ascending ID by default, it is possible to 
sort ascending/descending and by 

Type

, 

RX

, or 

TX

 column by 

clicking in the desired column title.

Note:

ODU0 type mapping is selected by default for all channels when the test is 
created. To change the ODU type mapping, use the 

Del Ch

 or 

Delete All

 

button then use the 

Add Ch

 button to select an other ODU type.

Edit Ch ID

 button selects a new channel ID from available list. 

Add Ch

 button allows adding new channels. 

Channel ID

 is the channel ID to be added. Subsequent channel ID 

are selected then assigned, skipping channel ID already assigned, 
when adding more than one channel at once. 

ODU Type

 is the ODU mapping type: 

ODU0

, 

ODU1

, 

ODU2

, or 

ODU3

. It is possible to have different ODU types when the 

OTN-MIX-MAPPING software option is enabled; otherwise all 
channels must have the same ODU type. 

Quantity

 is the number of channel to be added. 

Red 

Configured structure is not matching the MSI received signal or 
could contain an unsupported mapping  (for example 
Unallocated).

Gray 

Impaired signal is preventing RX structure decoding (for example 
when a LOS alarm is detected). 

Background 

Color

Description

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands