EXFO Power Blazer 88000 Series, User Manual

Page: 241 / 803

Test Setup - Test Configurator, Timer, and System
Power Blazer
229
Network Details (iSAM)
Note: At least one check box ( CIR or CIR+EIR ) has to be selected. Thus, clearing
the CIR check box while CIR+EIR check box is cleared, will automatically
select the CIR+EIR check box and vice versa.
Note:
For Dual Test Set, the CIR and CIR+EIR values are the same (Symmetric)
for both
L->R and R->L directions.

CIR
(Mbit/s) (Committed Information Rate) check box when selected
(default) sets the service rate guaranteed by the SLA (default is
1 Mbit/s
).

CIR+EIR (Mbit/s) check box when selected (cleared by default) sets
the best effort allowed traffic for the service. The EIR (Excess
Information Rate) value is equal to the CIR+EIR value minus CIR
(default is 1.5 Mbit/s). The threshold value is configurable from the
defined CIR value for this service to the line rate minus the total CIR
from all services.

Frame Type allows the selection of the frame type and frame size(s).

Frame types
choices are:
Fixed
and
EMIX
.
Fixed allows setting a single frame size.
EMIX
allows setting up to 8 EMIX frame sizes. The EMIX frame
sequence is repeated until the test ends. Default are 64 , 128 , 512 ,
1024
, and
1518
.
Quantity , available with EMIX , allows selecting the number of
EMIX frame sizes: 2 to 8 frames (default is
5
).