EXFO Power Blazer 88000 Series, User Manual

Page: 515 / 803

Test Results
Power Blazer
503
Summary (RFC 2544)
Throughput, Back-to-Back, Frame Loss, and
Latency Subtests

Throughput , Back-to-Back , Frame Loss , and Latency
For each subtest, its status (
--
(Idle),
In Progress
,
Completed
, or
Aborted - (reason)) and duration are displayed.

TX Frames
1
and
RX Frames
1
display the transmitted and received
frame counts of the subtest in progress. For Dual Test Set , frame
counts are available for both directions: from local to remote (
L->R
)
and remote to local ( R->L ). For Dual Port topology, frame counts are
available for both P1 to P2 (
P1->P2
) and P2 to P1 (
P2->P1
).

Trial #
1
displays the current trial iteration of the subtest in progress
when applicable.

Val. #
1
displays the current validation iteration of the subtest in
progress when applicable.

Step
1
displays the current step of the subtest in progress when
applicable.

Displayed Results : Select the displayed result mode: Current ,
Minimum
(default),
Maximum
, or
Average
.

Throughput / Back-to-Back / Frame Loss / Latency table.
Each frame size used for the test is displayed with its subtest statistics.
Statistics values are displayed based on the
Displayed Results setting.
“--” indicates that the result is not available because the test has not
run yet. While testing, one of the following messages is displayed for
each frame size:
Initializing
,
Learning
,
Testing
,
Waiting
,
Not
measurable , Aborted , Link is Down , or MAC not resolved .
Dir.
(Direction), available with
Dual Test Set
or
Dual Port
topology,
indicates respectively results from local to remote ( L->R ) and remote
to local (
R->L
), or P1 to P2 (
P1->P2
) and P2 to P1 (
P2->P1
).
1. Only displayed once the test is started.