manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 603

Test Functions

Power Blazer

591

OH - SONET/SDH

OH - SONET/SDH 

The SONET/SDH OH page allows modifying (TX) the overhead information 
to be transmitted and viewing (RX) the overhead information received. 

For 

SONET/SDH BERT

, from the 

Test

 menu, tap 

Functions

, and the 

OH

 

tab. 

For 

OTN-SONET/SDH BERT

, from the

 Test

 menu, tap 

Functions

, 

OH

, and 

the 

SONET/SDH

 sub tab. 

Tap on any overhead byte in TX to modify its value. 

Tap on any overhead byte in RX to see its detailed content/value. 

Note:

A byte in TX that has no value displayed or is grayed out, is not configurable 
from the OH tab. 

TX and RX Buttons (SDH) 

Tap on the TX or RX button to respectively access the overhead bytes in 
transmission or receive mode. 

STS-1 Timeslot/STM-1 Channel 

Allows selecting the timeslot number for the Transport OH bytes. The 
STS/AU/TU-3 overhead bytes are always for the timeslot selected in the test 
configuration. Furthermore when modifying the Transport OH bytes H1 SS 
bits, the modification applies to all timeslots when the test topology is 

Coupled

. Choices are 

1

 (default) to 

192

 (SONET) / 

64

 (SDH) depending on 

the OC-N/STM-N interface selected. 

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands