EXFO Power Blazer 88000 Series, User Manual

Page: 102 / 803

Selecting and Starting a Test
90
88000 Series
Sync Test Applications
4. Tap the Timer tab to automatically start and/or stop the test at a given
time or for a specific duration (refer to
Timer
on page 330). Not
supported with Wander test application.
5. For additional test configurations refer to
Test Functions
on page 539.
6. Tap the Start button from the right navigation bar to start the test (refer
to
Start/Stop|TX Button
on page 657). The
Summary
result page will
be automatically displayed when the test is started from any Setup
configuration page. For additional results refer to
Test Results
on
page 341.
7. Depending on the test, when the test ends automatically or manually
stopped, the generate report pop-up is displayed by default. If required,
tap
Yes
to generate a report of the test results and statistics (refer to
Report Button on page 647 for more information).