EXFO Power Blazer 88000 Series, User Manual

Page: 106 / 803

Selecting and Starting a Test
94
88000 Series
Wireless Test Application
3c. Tap the test block to configure the specific test settings (refer to
page 155). For
Dual Port
topology, there is a test block for each
port.
3d. For
Framed L2
in
Base Station
emulation mode, tap the clock
block
1
to configure the clock synchronization (refer to Clock on
page 148). The clock is automatically set to
Recovered
for
Remote Radio Head emulation mode.
Note:
For Unframed , the clock is set to Internal .
4.
Refer to Test Functions on page 539 for additional test configurations.
5. Tap the
Timer
tab to automatically start and/or stop the test at a given
time or for a specific duration (refer to Timer on page 330).
6. Tap the
Start
button from the right navigation bar to start the test (refer
to Start/Stop|TX Button on page 657). The Summary result page will
be automatically displayed when the test is started from any
Setup
configuration page. For additional results refer to Test Results on
page 341.
7. When the test ends automatically or is manually stopped, the generate
report pop-up is displayed by default. If required, tap
Yes
to generate a
report of the test results and statistics (refer to Report Button on
page 647 for more information).
1. Not available in Dual Port topology. However the clock is automatically set to Internal for the Base Station and
Recovered for the Remote Radio Head .