EXFO Power Blazer 88000 Series, User Manual

Page: 772 / 803

Remote ToolBox
760
88000 Series
Overview
A remote module application offers the same level of control as if the
module is locally controlled with the following behaviors.

Multi-user behaviors:
Up to five connections including the local and/or remote sessions are
allowed per module. Beyond five connections, the performance to
service the connections may decrease.
Each user is able to individually navigate through the module
application without affecting the other users. However, any changes to
the operation of the test (
Start , Stop , Reset , etc.) or to any test
parameter will be applied to all users.

File location behaviors:
The save, load, report, and data capture functions are associated with
the location of the session initiated; for Remote ToolBox it will be on
the local PC. The files are not duplicated on the platform platform.

The Save/Load configurations are saved in the following folder:
Document\88000-PowerBlazer\Configuration

The Reports are saved in the following folder:
Document\88000-PowerBlazer\Reports
If a report is being generated, no user will be able to start the test
case until the report generation is completed.

The Data Capture files are saved in the following folder:
Document\88000-PowerBlazer\CaptureData
If a capture file is being generated, all users will be able to stop the
capture but only the user that initiates the capture will be able to
see the captured data file after generation.