manualshive.com logo in svg

EXFO Power Blazer 88000 Series, User Manual

Share
Download
EXFO Power Blazer 88000 Series User Manual Download Page 533

Test Results

Power Blazer

521

Summary (Wander)

Summary (Wander) 

From the 

Test

 menu, tap

 Results

, and the 

Summary

 tab. 

Test Status 

displays the current status of the Wander test. The global 

test pass/fail verdict is displayed next to the 

Test Status

 when enabled 

(see 

Pass/Fail Verdict

 on page 324). 

Start Time

 indicates the time the test was started. 

Test Recovery

, when displayed, indicates that the test has 

automatically recovered from a power failure. The number of 
occurrences is also displayed next to the 

Test Recovery

 field. Refer to 

Power Failure Recovery

 on page 659. 

Logger Full

, when displayed, indicates that the logger is full. Refer to 

Logger

 on page 432. 

Test Status

Description

--

The test is not running or results are not available. 

In Progress

The test is running. 

Completed

The test is completed, stopped at the planned time, or manually 
stopped when there is no set timer. 

Aborted 

Test has been aborted either manually (Stop) or automatically from an 
alarm. 

Summary of Contents for Power Blazer 88000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands