Suzuki Liana RH413, Service Manual

Page: 982 / 1302

8B-57 Air Bag System:
DTC Troubleshooting
Step Action Yes No
1 1) With ignition switch OFF, remove center pillar inner
garnish of applicable side then disconnect seat belt
pretensioner connector.
2) Check proper connection to applicable seat belt
pretensioner at terminals in connector “L75” or “L76”.
3) If OK, then connect Special Tool (A), (B) and (C) to seat
belt pretensioner connector disconnected at the Step 1).
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932-78310
With ignition switch ON, does DTC B1041 or B1045 still
exist?
Go to Step 2. Turn ignition switch to
OFF position, and
replace seat belt
pretensioner referring to
“Front Seat Belt
Removal and
Installation in Section
8A”.
“L75”, “L76”
(A)
(B)
(C)
STEERING WHEEL
I3RH0A820029-01