Suzuki Liana RH413, Service Manual

Page: 771 / 1302

Clutch: 5C-10
Clutch Cover, Clutch Disc, Flywheel and Clutch Release System Components
S3RH0A5306015
Clutch Cover, Clutch Disc and Flywheel
Removal and Installation
S3RH0A5306016
Removal
1) Dismount transaxle referring to “Manual Transaxle
Unit Dismounting and Remounting in Section 5B”.
2) Hold flywheel stationary with special tool and remove
clutch cover bolts (2), clutch cover (1) and clutch
disc.
Special tool
(A): 09924–17811
3) When pulling out input shaft bearing (1) from
flywheel (2), use the following special tools.
Special tool
(A): 09921–26020
(B): 09930–30104
Installation
NOTE
Before assembling, make sure that flywheel
surface and pressure plate surface have
been cleaned and dried thoroughly.
8 23 N m (2.3 kg-m)
11 23 N m (2.3 kg-m)
5
4
2
1
3
9
7
6
10
12
I2RH01530021-01
1. Release shaft oil seal
: Apply grease 99000-25010 to oil seal lip.
6. Clutch cover 11. Release arm nut
2. Release shaft No.2 bush
: Apply grease 99000-25010 to bush inside.
7. Clutch disc 12. Release arm bolt
3. Release shaft
: Apply grease 99000-25010 to contact part with release bearing
8. Clutch cover bolt : Do not reuse.
4. Release shaft No.1 bush
: Apply grease 99000-25010 to bush inside
9. Flywheel : Tightening torque
5. Release bearing
: Apply grease 99000-25010 to bearing inside diameter.
10. Release arm
I2RH01530022-01
I2RH01530023-01