Suzuki Liana RH413, Service Manual

Page: 483 / 1302

Brake Control System and Diagnosis: 4A-25
Specifications
Tightening Torque Specifications
S3RH0A4107001
NOTE
The specified tightening torque is also described in the following.
“Front Brake Hose / Pipe Construction”
“Rear Brake Hose / Pipe Construction”
“Master Cylinder Components”
“Brake Booster Components”
“LSPV (Load Sensing Proportioning Valve) Assembly (If Equipped)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Fasteners Information in Section 0A”.
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lb-ft
LSPV adjust nut 23 2.3 17.0
)
/
)
/
)
Front brake caliper bleeder plug
8.5 0.85 6.5
(for NISSIN made
caliper)
)
Front brake caliper bleeder plug
11.0 1.1 8.0
(for other than NISSIN
made caliper)
)
Rear wheel cylinder bleeder plug 8.5 0.85 6.5 )
Master cylinder fixing nut 13 1.3 9.5 )
Brake pipe flare nut 16 1.6 11.5 ) / )
Piston stopper bolt
10 1.0 7.5
(for LH steering
vehicle)
)
Booster mounting nut 13 1.3 9.5 )
Right side engine mounting bolt 55 5.5 40.0 )
Engine mounting bracket nut 75 7.5 54.5 )
Clevis lock nut 25 2.5 18.5 (LH steering vehicle) )
Clevis lock nut 19 1.9 14.0 (RH steering vehicle) )
LSPV mounting bolt 23 2.3 17.0 )