Suzuki Liana RH413, Service Manual

Page: 613 / 1302

Automatic Transmission/Transaxle: 5A-65
3 Check timing solenoid valve resistance
1) Turn ignition switch OFF.
2) Disconnect valve body harness connector (1, 2) on
transaxle.
3) Check for proper connection to solenoid valve at “GRN/
YEL” circuit.
4) Check resistance of solenoid valve.
Timing solenoid valve resistance
Between terminal of transaxle side valve body
harness connector and transaxle: 11 – 15
Ω
at 20
°
C
(68
°
F)
Is check result satisfactory?
Go to Step 4. Replace timing solenoid
valve or lead wire.
4 Check timing solenoid valve circuit for ground short
1) Connect valve body harness connector.
2) Disconnect TCM connectors.
3) Measure resistance between terminal “G08-10” of
disconnected harness side TCM connector and ground.
Is it 11 – 15
Ω
at 20
°
C (68
°
F)?
Intermittent trouble or
faulty TCM.
Check for intermittent
referring to “Intermittent
and Poor Connection
Inspection in Section
00”.
If OK, substitute a
known-good TCM and
recheck. “GRN/YEL” circuit
shorted to ground.
Step Action Yes No
1
6 7
8 9
10
5 4 3 2
1
2
I2RH0B510029-01