Suzuki Liana RH413, Service Manual

Page: 747 / 1302

Manual Transmission/Transaxle: 5B-38
Transfer Assembly Disassembly and Assembly
S3RH0A5206025
Disassembly
1) Remove side bearing retainer referring to “Manual
Transaxle Assembly Disassembly and Assembly”.
2) Remove rear case bolts (1) and then remove
transfer assembly (2) and differential assembly.
3) Remove rear mounting (1).
4) Remove output case bolts (2).
5) Remove output case (3).
6) Using special tool, hold drive gear (2) securely and
loosen bevel pinion nut.
Special tool
(A): 09927–76030
7) Drive out bevel pinion (1) with plastic hammer (2).
At this time, drive gear bearing (3), drive gear (4) and
pinion bearing come off at the same time.
8) Drive pinion bearing outer races (2) out of rear case
(3) by using bar (1).
9) Unfasten caulking of output flange nut and loosen it
while holding flange (2) with special tool.
Special tool
(A): 09930–40113
I3RH0A520071-01
3
2
2
1
I3RH0A520032-01
I3RH0A520033-01
1. Box (30 mm)
I3RH0A520034-01
I3RH0A520035-01
I3RH0A520036-01