Suzuki Liana RH413, Service Manual

Page: 1162 / 1302

9B-9 Lighting Systems:
Installation
Reverse removal procedure.
Headlight Diode Inspection
S3RH0A9206007
Check internal circuit of headlight diode (1) using
multimeter (diode check range) as shown circuit. If found
defective, replace diode.
Headlight, Clearance Light, Front / Rear Fog
Light Relays Inspection
S3RH0A9206008
1) Check that there is no continuity between terminal
“C” and “D”. If there is continuity, replace relay.
2) Connect battery positive (+) terminal to terminal “B”
of relay.
3) Connect battery negative (–) terminal to terminal “A”
of relay.
4) Check continuity between terminal “C” and “D”. If
there is no continuity when relay is connected to the
battery, replace relay.
Hazard Switch Inspection
S3RH0A9206009
Check for continuity between terminals at each switch position. If check result is not as specified, replace switch.
Stop (Brake) Lamp Switch Inspection
S3RH0A9206010
Check stop (brake) lamp switch for continuity between terminals at each switch position.
If check result is not as specified, replace switch.
1
I2RH01920006-01
“D”
“B”
“A”
“C”
I2RH01920004-01
I3RH0A920012-01
a
b
c
d
Terminal
Shaft condition
FREE
PUSH
a b c d
I3RH0A920008-01