Suzuki Liana RH413, Service Manual

Page: 1038 / 1302

8B-113 Air Bag System:
4) Confirm that each air bag (inflator) module and/or
seat belt pretensioner is securely mounted.
5) Check that there is no open, short or damage in
special tools (deployment harness (A) and adapter
cable (B)). If any faulty condition is found, do not use
it and be sure to use new deployment harness (A)
and/or adapter cable (B). And connect adapter cable
(B) to deployment harness (A) and lock connectors
with lock slider (2).
Special tool
(A): 09932-75030
(B): 09932-78332
NOTE
If faulty of seat belt pretensioner connector
of adapter cable (B) is found, replace it with
spare connector (C).
For special tool (B) spare connector
Special tool
(C): 09932–75410
6) Short two deployment harness leads (1) together by
fully seating one banana plug into the other.
WARNING
!
Deployment harness (A) shall remain shorted
and not be connected to 12 volts vehicle
battery until you are ready to deploy air bag
(inflator) module or activate seat belt
pretensioner.
7) Connect adapter cable (B) in series with deployment
harness (A) to air bag (inflator) module or seat belt
pretensioner as follows.
a) For air bag (inflator) module
Connect adapter cable (B) in series with
deployment harness (A) and push adapter cable
(B) connector to air bag (inflator) module
connector (driver or passenger) till click can be
heard.
b) For seat belt pretensioner
Connect adapter cable (B) in series with
deployment harness (A) to seat belt pretensioner
and lock connector with lock part.
[A]: Driver air bag (inflator) module
[B]: Passenger air bag (inflator) module
[C]: Side air bag (inflator) module
[D]: Seat belt pretensioner
3
1
2
3
[D]
[C]
[B]
[A]
1
2
1
2
1
2
I3RH0A820083-01