Suzuki Liana RH413, Service Manual

Page: 642 / 1302

5A-94 Automatic Transmission/Transaxle:
Shift Lock Solenoid Replacement
S3RH0A5106020
1) Remove parking brake cover and console box.
2) Replace shift lock solenoid (1).
3) Install covers as they were.
NOTE
• Check that detent pin (3) is locked at “P”
position by solenoid cam (2).
• Check to confirm that solenoid cam (2) is
pulled in when ignition key is turned to ON
and brake pedal is depressed, so allowing
detent pin (3) to be pushed down.
Key Interlock Cable Removal and Installation
S3RH0A5106021
NOTE
Don’t bend interlock cable excessively when
removing and installing it, or system will not
operate correctly.
Removal
1) If the vehicle is equipped with air bag system,
disconnect negative cable at battery and disable air
bag system, referring to “Disabling Air Bag System in
Section 8B”.
2) Remove steering column cover.
3) Turn ignition switch to ACC position.
4) Pull out key interlock cable (1) from key cylinder
cover (2) while pressing checkhook with slotted
screwdriver (3) or the like.
5) Turn ignition switch to LOCK position.
6) Remove parking brake cover and console box.
7) Detach cable end (1) from interlock cam (2) while
pressing claws (3) of interlock cam boss.
At this time, be careful not to cause damage to its
claws.
Detach cable casing cap (4) from selector bracket
(5) while pressing checkhook.
8) Remove interlock cable.
3
1
2
I2RH01510077-01
1
2
3
I2RH01510083-01
1
2
4
4
5
3
I2RH01510084-01