Suzuki Liana RH413, Service Manual

Page: 407 / 1302

Drive Shaft / Axle: Front 3A-8
10) When fixing boot (1) to tripod joint housing (2) with
differential side big band (3), adjust so that
measured dimensions become as indicated in the
following.
Drive shaft boot fixing position (distance
between reference position and small boot band)
2WD model and left side of 4WD model “a”: 157.5
– 167.5 mm (6.20 – 6.59 in.)
Right side of 4WD model “b”: 182.5 – 192.5 mm
(7.19 – 7.58 in.)
CAUTION
!
• Bend each boot band against forward
rotation.
• Do not squeeze or distort boot when
fastening it with bands. Distorted boot
caused by squeezing air may reduce its
durability.
For DOJ type
Judging from abnormality noted before disassembly and
what is found though visual check of component parts
after disassembly, prepare replacing parts and proceed
to reassembly.
Make sure that wheel side joint assembly (1) and DOJ
housing (2) are washed thoroughly and air dried.
Replace boot(s) (3) with new one(s).
CAUTION
!
• Do not wash boots in degreaser, such as
gasoline or kerosene, etc. Washing in
degreaser causes deterioration of boot.
• To ensure full performance of joint as
designed, be sure to distinguish between
two types of grease in repair set and apply
specified volume to respective joint.
Grease color
“A”: Black
“B”: Black (rather light than “A”)
Amount
“A”: 45 – 65 g (1.6 – 2.3 oz)
“B”: 70 – 85 g (2.5 – 3.0 oz)
[A]: Wheel side
[B]: Differential side
I3RH0A311011-01
I2RH01310030-01
[A]: Wheel side
[B]: Differential side
I3RH0A311012-01