8B-97 Air Bag System:
7) If equipped with side air bag (inflator) module,
disconnect yellow connector (6) of side air bag
(inflator) module under front seat cushion (7).
a) Release locking of lock slider (5).
b) After unlocked, disconnect connector.
NOTE
With “AIR BAG” fuse removed and ignition
switch ON, “AIR BAG” warning lamp will be
ON.
This is normal operation and does not
indicate air bag system malfunction.
Enabling Air Bag System
S3RH0A8206002
1) Confirm that battery negative (–) cable is
disconnected.
2) Turn ignition switch to “LOCK” position and remove
key.
3) Connect yellow connector (1) of contact coil and
combination switch assembly by pushing connector
till clicks heard from it.
4) In case of passenger air bag (inflator) module,
connect yellow connector (1) of passenger air bag
(inflator) module by pushing connector till click is
heard from it.
a)
b)
5
a)
b)
5
7
6
I3RH0A820056-01
1
I3RH0A820057-01
I3RH0A820058-01
Summary of Contents for Liana RH413
