Suzuki Liana RH413, Service Manual

Page: 570 / 1302

5A-22 Automatic Transmission/Transaxle:
) P0758
23
Shift solenoid-B / No.2
electrical Voltage of shift solenoid terminal is high
although TCM is commanding shift
solenoid to turn OFF.
1 driving
cycle
1 driving
cycle
24
Voltage of shift solenoid terminal is low
although TCM is commanding shift
solenoid to turn ON.
) P0785 13
Timing solenoid • Voltage of timing solenoid terminal is
high although TCM is commanding
timing solenoid to turn OFF.
or
• Voltage of timing solenoid terminal is low
although TCM is commanding timing
solenoid to turn ON.
1 driving
cycle
1 driving
cycle
)
P1700
32
Throttle position signal
circuit malfunction Too short low signal of pulse signal from
ECM to TCM continues out of
specification.
1 driving
cycle
1 driving
cycle
33
Too long low signal of pulse signal from
ECM to TCM continues out of
specification.
)
P1702 52
Internal malfunction of
TCM Calculation of current data stored in TCM
is not correct comparing with pre-stored
checking data in TCM.
1 driving
cycle
1 driving
cycle
) P1705 51
Engine coolant
temperature signal circuit
malfunction • Too long high signal of pulse signal from
ECM to TCM continues out of
specification.
or
• Too long low signal of pulse signal from
ECM to TCM continues out of
specification.
or
• Too long or short low signal of pulse
signal from ECM to TCM is detected in
continuous 8 pulses.
1 driving
cycle
1 driving
cycle
) P1730 64
Engine torque signal circuit
malfunction • Too short low signal of pulse signal from
ECM to TCM continues out of
specification.
or
• Too long low signal of pulse signal from
ECM to TCM continues out of
specification.
1 driving
cycle
1 driving
cycle
) P1895 27
Torque reduction signal
circuit malfunction Voltage of torque reduction signal circuit
terminal is low although TCM does not
require ECM to reduce engine torque. *2
1 driving
cycle
1 driving
cycle
DTC No.
Detecting item
Detecting condition
(DTC will set when detecting:)
A B
Type I Type II