Suzuki Liana RH413, Service Manual

Page: 652 / 1302

5A-104 Automatic Transmission/Transaxle:
16) Remove valve body harness (1).
CAUTION
!
When pulling valve body harness out of
transaxle case, take care not to damage
transmission fluid temperature sensor (2) at
narrow exit of case.
Careless sensor treatment might cause
sensor malfunction.
17) Remove governor apply No.1 gasket (1).
18) Remove cooler check valve (1) and spring (2).
19) Remove accumulator pistons and springs.
To remove C2 (1), C1 (2) and B1 (3) accumulator
pistons and springs, position rag on pistons to catch
each piston. To remove pistons, force low-pressure
compressed air (1 kg/cm
2 , 15 psi, 100 kPa, max) into
hole (4) as shown in the figure, and pop each piston
into rag.
NOTE
Do not push accumulator pistons with
fingers or anything before removing them.
Pushing them may cause compressed fluid
in accumulator to spew out of hole and get to
your face and clothes.
20) Remove transaxle case plug (1).
I2RH0B510091-01
I2RH0B510092-01
I2RH0B510093-01
I2RH0B510094-01