Suzuki Liana RH413, Service Manual

Page: 143 / 1302

Engine General Information and Diagnosis: 1A-92
5 Check wire circuit
1) Turn ON ignition switch.
2) Check voltage between “G04-18” terminal wire and
vehicle body ground.
Is voltage 0 V?
Go to Step 6. “BRN” wire shorted to
power supply circuit.
6 Check radiator fan control relay No.1
1) Check radiator fan control relay No.1, referring to
“Radiator Fan Relay No.1, No.2 and No.3 Inspection in
Section 1C”.
Is result in good condition?
“BRN” wire open circuit. Replace relay.
7 Check radiator fan control No.1
1) Connect connectors to ECM with ignition switch turned
OFF.
2) Run engine at ECT is over 97
°
C, 207
°
F.
3) Measure voltage between vehicle body ground and
“G04-18” terminal wire.
Is voltage lower 1.5 V?
Go to Step 8. Faulty ECM.
8 Check radiator fan control
1) Disconnect radiator fan control relay No.2 (2), and No.3
(3) from relay box with ignition switch turned OFF.
2) Run engine at ECT is over 97
°
C, 207
°
F.
3) Measure voltage between vehicle body ground and each
“BLU/RED” wire terminal.
1. Radiator fan relay No. 1
Is voltage lower 10 – 14 V?
Go to Step 9. “BLU/RED” wire open
circuit.
9 Check wire circuit
1) Disconnect connector from ECM with ignition switch
turned OFF.
2) Connect radiator fan control relay No.2 to relay box.
3) Turn ON ignition switch, measure voltage between
vehicle body ground and “G04-3” terminal wire.
Is voltage 10 – 14 V?
Go to Step 10. Go to Step 11.
10 1) Disconnect radiator fan control relay No.2 and then
connect radiator fan control relay No.3 to relay box.
2) Turn ON ignition switch, measure voltage between
vehicle body ground and “G04-3” terminal wire.
Is voltage 10 – 14 V?
Go to Step 14. Go to Step 11.
Step Action Yes No
1
2
3
I2RH01110116-01