8B-31 Air Bag System:
NOTE
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to “DTC Clearance”), if any.
• Repeat “Air Bag Diagnostic System Check” to confirm that the trouble has been corrected.
2
1) With ignition switch OFF, disconnect SDM connector.
2) Check proper connection to SDM at “L70-24” and “L70-
23” terminals.
3) If OK, then measure resistance between “L70-24” and
“L70-23” terminals with connected Special Tool (B).
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932-78340
Is resistance 2.7
Ω
or less?
Substitute a known-
good SDM and recheck.
Repair high resistance
or open in “YEL/GRN”
or “YEL” wire circuit.
Step
Action
Yes
No
STEERING WHEEL
(B)
(D)
(A)
"L35"
I3RH0A820022-01
(A)
(A)
“L70-23” “L70-24”
I3RH0A820023-01
Summary of Contents for Liana RH413
