Suzuki Liana RH413, Service Manual

Page: 1178 / 1302

9C-13 Instrumentation / Driver Info. / Horn:
Parking Brake Switch Inspection
S3RH0A9306012
Check for continuity between parking brake switch
terminal and body ground as shown in figure. If found
defective, replace switch.
Parking brake switch specification
OFF position (parking brake released): No continuity
ON position (parking brake lever pulled up):
Continuity
Door Switch (Front / Rear Door) Inspection
S3RH0A9306013
Remove door switch from body and check switch for
continuity. If found defective, replace switch.
Door switch (front / rear door) specification
OFF position (Door closed): No continuity
ON position (Door open): Continuity
Rearend Door Switch (for Wagon Model)
Inspection
S3RH0A9306014
Check for continuity between terminal “a” and “b” shown
in the following.
If check result is not as specified, replace switch.
Rearend door switch (for 5 door model) specification
Rearend door closed: No continuity
Rearend door opened: Continuity
Trunk Lid Switch Inspection
S3RH0A9306015
Check for continuity between trunk lid connector terminal
(1) and body ground.
If check result is not as specified, replace switch.
Trunk lid switch specification
Trunk lid switch (2) is pushed: No continuity
Trunk lid switch (2) is free: Continuity
Outside Air Temperature Sensor (If Equipped
with Information Display) Removal and
Installation
S3RH0A9306024
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to “Front Bumper
and Rear Bumper Components in Section 9K”.
3) Disconnect outside air temperature sensor
connector.
4) Remove outside air temperature sensor (1).
1. Parking switch
2. Parking lever
I2RH01930010-01
I3RH0A930004-01
2. Front bumper member
I2RH01920025-01
1
2
I2RH01920026-01
I3RH0A930005-01