Suzuki Liana RH413, Service Manual

Page: 540 / 1302

4E-38 ABS:
CAUTION
!
Do not pull or twist wire harness more than
necessary when installing front wheel speed
sensor.
3) Check that there is no clearance between sensor
and knuckle.
Front Wheel Speed Sensor Inspection
S3RH0A4506007
• Check sensor for damage.
• Measure resistance of sensor.
Between both terminals (1) of sensor
1.2 – 1.6 k
Ω
at 20
°
C (68
°
F)
Between sensor terminal (1) and sensor body (2)
Infinity (
∞
)
If the check result is not as specified and any
malcondition is found, replace.
Rear Wheel Speed Sensor On-Vehicle
Inspection
S3RH0A4506008
Output Voltage Inspection
1) Disconnect negative cable from battery.
2) Remove quarter inner trim (1).
3) Turn over floor carpet.
4) Hoist vehicle.
5) Disconnect connector of wheel speed sensor.
6) Connect voltmeter between connector (1) terminals.
7) While turning wheel at a speed of approximately 3/4
to 1 1/4 rotation per second, check AC voltage of
sensor.
Output AC voltage at 3/4 to 1 1/4 rotation per
second
53 mV or more
[A]: OK
[B]: NG
I3RH0A450015-01
I2RH01450052-01
[A]: For wagon model
[B]: For sedan model
1
1
[B]
[A]
I3RH0A450023-01
I3RH01450049-01