Suzuki Liana RH413, Service Manual

Page: 941 / 1302

Air Bag System: 8B-16
NOTE
• When 2 or more codes are indicated by “AIR BAG” warning lamp flashing pattern and SUZUKI scan
tool, the lowest numbered code will appear first.
• Current DTC and history DTC can be identified by lighting and flashing of “AIR BAG” warning lamp
as follows. However, if a multiple number of DTC’s are set an even one of them is a current DTC,
“AIR BAG” warning lamp remains on after ignition switch is turned ON. Therefore, it is not possible
to identify any of them as to whether it is a current one or a history one. (But use of SUZUKI scan
tool will make identification possible.)
B1072 ) 72
Side sensor
(driver side)
Internal fault
Diagnose trouble
according to
diagnostic flow table
corresponding to each
code No.
B1073 ) 73
Side sensor circuit
(driver side) Correspondence
abnormality
B1074 ) 74
Side sensor
(passenger side)
Internal fault
B1075 ) 75
Side sensor circuit
(passenger side) Correspondence
abnormality
B1081 ) 81
Side air bag circuit
(driver side)
Resistance high
B1082 ) 82 Resistance low
B1083 ) 83 Short to ground
B1084 ) 84 Short to power circuit
B1085 ) 85
Side air bag circuit
(passenger side)
Resistance high
B1086 ) 86 Resistance low
B1087 ) 87 Short to ground
B1088 ) 88 Short to power circuit
Current DTC is set.
(Abnormality exists at present.) History DTC is set only.
(Faulty condition occurred once in
the past but normal condition is
restored at present.)
“AIR BAG” warning lamp after ignition
switch ON Flashing 6 times and turns on. Flashing 6 times and turns off.
“AIR BAG” warning lamp when
grounding diagnosis switch Current DTC is displayed. History DTC is displayed.
DTC
“AIR BAG” Warning Lamp Flashing
Pattern Diagnosis
No. MODE
MCODE00072-0-01
MCODE00073-0-01
MCODE00074-0-01
MCODE00075-0-01
MCODE00081-0-01
MCODE00082-0-01
MCODE00083-0-01
MCODE00084-0-01
MCODE00085-0-01
MCODE00086-0-01
MCODE00087-0-01
MCODE00088-0-01