Suzuki Liana RH413, Service Manual

Page: 700 / 1302

5A-152 Automatic Transmission/Transaxle:
68) After applying A/T fluid to new O-ring, fit it to
transaxle case plug (1). Then install the transaxle
case plug to transaxle case (2).
Tightening torque
Transaxle case plug (a): 7.5 N·m (0.75 kgf-m, 5.5
lb-ft)
69) Install new O-rings to each accumulator piston and
apply A/T fluid to them.
Accumulator O-ring dimension
NOTE
Make sure that O-rings are not twisted or
caught when installing.
70) Install B1, C1, C2 accumulator pistons and springs.
Accumulator piston identification
Accumulator spring identification
O-ring name
Inside
diameter
Section
diameter
Large B1 accumulator O-ring (2)
Large C1 accumulator O-ring (2)
Large C2 accumulator O-ring (2)
– Above three O-rings are same.
29.4 mm
(1.16 in.) 2.6 mm
(0.10 in.)
Small B1 accumulator O-ring (4)
19.7 mm
(0.78 in.) 2.6 mm
(0.10 in.)
Small C1 accumulator O-ring (6)
Small C2 accumulator O-ring (6)
– Above two O-rings are same.
21.8 mm
(0.86 in.) 2.6 mm
(0.10 in.)
I2RH0B510316-01
I2RH0B510317-01
Piston name
Identification as
embossed letters on
piston
B1 accumulator piston (3) SB-1
C1 accumulator piston (5) SC-1
C2 accumulator piston (8) SC-2
Spring name
Color of
identification
paint
Free
length
Outside
diameter
B1
accumulator
No.2 spring (1)
Pink
47.1 mm
(1.854 in.)
16.0 mm
(0.630 in.)
C1
accumulator
No.2 spring (7)
Blue
28.1 mm
(1.106 in.)
16.8 mm
(0.661 in.)
C2
accumulator
No.2 spring (9)
Light Green
57.2 mm
(2.252 in.)
17.5 mm
(0.689 in.)
I2RH0B510318-01