Suzuki Liana RH413, Service Manual

Page: 1202 / 1302

9E-11 Glass / Windows / Mirrors:
Rear Door Glass Removal and Installation
S3RH0A9506008
Removal
1) Remove inside handle bezel (1).
2) Remove inside door grip cover (2), and then remove
door trim mounting bolts (3).
3) Detach door trim mounting clips.
4) Remove door trim (1).
With inside handle bezel (2) tilted toward inside, turn
and remove door trim as shown.
And disconnect power window switch lead wire at
coupler.
5) Remove door sealing cover (1).
6) Remove outer weather-strip (1). Do not deform it
when removal.
7) Loosen door glass mounting screws (1), and then
drop door glass (2) from window regulator (3).
8) Detach rear part of glass run from sash (4), and
remove sash by removing 2 screws (5) and bolt (6).
9) Remove door glass (2).
1. Door glass 6. Inner sash 11. Door grip cover
2. Window regulator assembly
: Apply lithium grease 99000-25010 to
sliding part.
7. Door panel 12. Rear door window regulator mounting bolt
: Tightening referring to “Rear Door Window
Regulator Removal and Installation”.
3. Glass run 8. Door glass mounting screw
: Tighten front screw first, and then tighten
rear screw.
a, b: Sash upper mounting screw
: Tightening order: c
→
b
→
a
4. Door trim 9. Rear door outer weather-strip c: Sash lower mounting bolt
: Tightening order: c
→
b
→
a
5. Door sealing cover 10. Rear door outer weather-strip mounting
screw.
: Tightening torque
1
2
3
I2RH01950028-01
1 2
I4RH01950010-01
1
I2RH01950030-01
1
2
I2RH01950031-01
2
1
3
6
5
4
I4RH01950011-01